How To Remove A Single Handle Kitchen Faucet With Sprayer?

Single handle kitchen faucets with side sprayers are common in many households and commercial kitchens. Over time, these faucets may need to be removed for replacement, repair, or upgrading to a more modern model. As a faucet supplier, we emphasize that correct removal not only protects the sink and plumbing but also prepares the installation site for a high-quality new faucet.

Preparation Before Removal

• Shut Off Water Supply: Locate the hot and cold valves under the sink and close them. This step prevents leaks or accidental flooding.

• Clear the Work Area: Remove cleaning supplies or stored items from under the sink to create a safe, accessible workspace.

• Gather Tools: Adjustable wrench, basin wrench, bucket, and towels are essential.

Step 1: Disconnect the Sprayer Hose

The sprayer is usually connected to the main faucet body with a coupling under the sink. Press the quick-connect tab or loosen the fitting, then gently pull the sprayer hose free. Place a bucket beneath to catch residual water.

Step 2: Detach the Water Supply Lines

Using an adjustable wrench, disconnect the hot and cold water supply lines from the shutoff valves. Drain any remaining water into a towel or bucket.

Step 3: Loosen the Mounting Hardware

Under the sink, the faucet is held in place by mounting nuts or a bracket system. Use a basin wrench to loosen and remove these fittings. For older faucets, corrosion may make this step harder—apply penetrating oil if needed.

Step 4: Remove the Faucet Body

Once the mounting hardware is removed, lift the faucet body straight out from above the sink. Be careful not to scratch the sink surface during removal.

Step 5: Clean the Sink Area

After the faucet is out, clean the sink deck thoroughly. Remove old putty, mineral deposits, or rust so the new faucet sits flush and seals correctly.

Supplier’s Perspective

From our experience as a kitchen faucet supplier:

• Compatibility Matters: Many single handle faucets with sprayers use different mounting hole configurations. When replacing, ensure the new faucet matches your sink’s layout.

• Upgrade Opportunity: Removal is the ideal time to switch to more advanced designs such as pull-down sprayer faucets, which combine sprayer functionality directly into the spout.

• Durability Focus: Using faucets with solid brass construction and corrosion-resistant finishes minimizes future removal needs.

• Technical Support: We provide guidance for installers and customers to ensure safe removal and seamless installation of new models.

Conclusion

Removing a single handle kitchen faucet with sprayer involves shutting off the water, disconnecting the sprayer and supply lines, loosening the mounting hardware, and carefully lifting out the faucet. For end users, this process prepares the sink for an upgrade. If you need to update your kitchen faucet, please feel free to contact us.